Biosystems Engineering, 2013 time schedule
|
Day |
Time |
|
|
|
8.00 – 9.30 |
Registration and morning coffee (Estonian University of Life Sciences, Institute of Technology, 56 Kreutzwaldi Str., Tartu) |
|
Thursday 9.05.13 |
9.30 – 9.45 |
Opening: Rector Prof.
Mait Klaassen (Institute
of Technology, room A204) Opening remarks and welcome: Director
Institute of Technology Margus Arak |
|
|
|
Plenary session (Institute of
Technology, room A204): |
|
|
9.45 – 10.15 |
Implementation of hydrological
processes and agricultural management options into the ATB-Modeling Database to improve the water productivity at
farm scale – Simone Kraatz, Researcher of Department
Technology-Assessment and Substance Cycles,
Leibniz-Institute for Agricultural Engineering Potsdam-Bornim, Germany |
|
|
10.15 – 10.45 |
Comparison of different pretreatment methods
for straw for lignocellulosic bioethanol production – Heike Kahr, University
of Applied Sciences Upper Austria |
|
|
10.45 – 11.15 |
Translating Sustainability
Concerns at Plant Level Asset Operations: Industrial Performance Assessment –
R.M. Chandima
Ratnayake, Associate Professor in Mechanical
Engineering, Department of Mechanical and Structural Engineering and
Materials Science, University of Stavanger-UiS, Norway |
|
|
11.15–11.45 |
Changes,
Challenges and Opportunities in the Wood Energy Supply Chain – Antti Pasila, Dean of Scool of Agriculture and Forestry, Seinäjoki University of
Applied Sciences, Finland |
|
|
11.45 – 13.00 |
LUNCHin Estonian
University of Life Sciences, 1 Kreutzwaldi
Str., Tartu |
|
Thursday 9.05.13 |
13.00 |
Agricultural Machinery and Agrotechnology (Institute of Technology, room
B136) |
Production Engineering (Institute of Technology, room
B200) |
Power engineering and renewable
energy (Institute of Technology, room
A204) |
Ergonomics (Institute of technology, room
A220) |
|
|
|
Chair: Prof.
Jukka Ahokas |
Chair: PhD Tõnu Leemet |
Chair: Prof.
Andres Annuk |
Chair: Prof. Mati Pääsuke |
|
|
|
Influence of soil cultivation and farm machinery passes on water preferential flow using brilliant blue dye tracer – J. Chyba, M. Kroulík, J. Lev, F. Kumhála: Czech Republic |
Some advantages by
using tools with notches
– A. Liivapuu: Estonia |
Study on availability of herbaceous resources for production of solid biomass fuels in Latvia – A. Beloborodko, K. Klavina, F. Romagnoli, K. Kenga, M. Rosa, D. Blumberga: Latvia |
Management of health hazards during shale oil handling – A. Traumann,
P. Tint, O. Järvik, V. Oja:
Estonia |
|
|
13.00 – 15.00 |
Design a drive of interaxle mechanical
cutter used in low trellises – D.
Hoffmann, P. Heřmánek, A. Rybka, I. Honzík: Czech Republic |
Assessment of bonding quality for several commercially available adhesives – M. Müller, P. Valášek: Czech Republic |
Assessment of Changes in Households’
Electricity Consumption – I. Laicane, A. Blumberga, M. Rosa, D. Blumberga:
Latvia |
The model for assessment of health risks of dust
connected with wood manufacturing in Estonia – A.
Traumann,
K. Reinhold, P. Tint: Estonia |
|
|
|
Theoretical analysis of interaction of disc coulters and straw residues under no-tillage conditions – E. Šarauskis, K. Romaneckas, A. Sakalauskas, E. Vaiciukevičius, D. Karayel, K. Vaitauskiene: Lithuania & Turkey |
Research of liquid contaminants
influence on adhesive bond strength applied in agricultural machine
construction – M. Müller: Czech Republic |
Relation
of energy content variations of straw to the fraction size, humidity,
composition and environmental impact –
S.
Kalinauskaitė, A. Sakalauskas, E. Šarauskis, A. Jasinskas, M.
Ahlhaus: Lithuania & Germany |
Ergonomics approach in
Entrepreneurship – H. Kalkis, Z. Roja, V. Kalkis, I. Rezepina: Latvia |
|
|
|
Technical and economic analysis of alternative
pruning systems in high dimensions olive trees in Calabria – L. M. Abenavoli, C. Marcianò: Italy |
Increasing the efficiency of
external turning by using the multiple layer construction of the cutting tool
holder – M.
Madissoo: Estonia |
Experimental
study on the optimisation of staged air supply in the retort pellet burner – A. Žandeckis,
V. Kirsanovs, M. Dzikevičs, D. Blumberga: Latvia |
Research of parameters of light emitting diode lamps and their
suitability for lighting of working areas – J. Paju: Estonia |
|
|
|
Rational
application of mobile machinery for slurry transportation and distribution – J. Priekulis
and K. Vartukapteinis: Latvia |
Two body abrasion of composites containing filler on the basis of hard cast iron deposits utilizable in agrocomplex – P. Valášek, M. Brožek: Czech Republic |
New types of air heating solar collectors and their use in drying agricultural products – A. Aboltins, J. Palabinskis: Latvia |
Electromagnetic
fields in contemporary office workplaces – T. Koppel, T. Tasa, P. Tint: Estonia |
|
|
|
Theoretical modelling of the
briquetting process at different pressing equipment – T. Ivanova, A. Muntean,
B. Havrland, V. Pobedinsky:
Czech Republic & Republic of Moldova |
Manufacturing of the cellular
structures from the perforated metallic materials – V.
Mironovs, M.
Lisicins, I. Boiko2and V. Zemchenkovs: Latvia |
Energetic balance of autonomous hybrid renewable energy based EV charging station in winter conditions – V. Osadcuks, A. Pecka and R. Selegovskis: Latvia |
Possibilities of prolonging
human life in the near future – Ü. Kristjuhan: Estonia |
|
|
|
Effect of crop
residues on nitrous oxide flux in the controlled traffic farming system
during the soil tillage by LEMKEN Rubin 9 disc harrow – T. Šima, L. Nozdrovický, M. Dubeňová, K. Krištof, J.
Krupička: Slovak Republic |
Composing and solving differential equations for small oscillations of
mathematical spring-coupled pendulums – A. Aan, M. Heinloo: Estonia |
Assessment of unconventional bioenergy
plant chopping, milling and pelleting quality indicators and physical‑mechanical properties
– A. Jasinskas, R. Simonavičiūtė, E.
Šarauskis, A. Sakalauskas, S. Čekanauskas: Lithuania |
Workability of older academics
– Ü. Kristjuhan and E. Taidre: Estonia |
|
|
|
Comparative
analysis on effectiveness of AMS use on an example of three European
countries – M.
Gaworski, A. Leola, J. Priekulis: Poland & Estonia &
Latvia |
Method
of increasing the quality of thread pitches – V. V. Maksarov: Russia |
Hot-air heating of family houses with accumulation of energy in the floor – P. Kic: Czech Republic |
Electromagnetic
fields in contemporary office workplaces – T. Koppel, T. Tasa, P. Tint: Estonia |
|
|
15.00 – 15.20 |
Coffee break, room
A202 |
|
|
|
|
Thursday 9.05.13 |
15.20 |
Agricultural Machinery and Agrotechnology (Institute of Technology, room
B136) |
Vehicles and Fuels (Institute of Technology, room
B200) |
Power engineering and renewable
energy (Institute of Technology, room
A204) |
Ergonomics (Institute of technology, room
A220) |
|
|
|
Chair: Ass. Prof.
Edvin Nugis |
Chair: PhD Timo Kikas |
Chair: Prof.
M. Gaworski |
Chair: PhD Oliver Sada |
|
|
|
Effect of the nitrogen
fertilizer rate on the nitrous oxide flux from haplic
luvisol soil in the laboratory experiment – T. Šima, L. Nozdrovický, K. Krištof, M. Dubeňová, J.
Krupička: Slovak Republic |
Influence of harvesting time on biochemical composition and glucose yield from hemp – M. Tutt, T. Kikas, J. Olt: Estonia |
ENPOS – Energy Positive Farm – J. Ahokas, H. Mikkola, T. Jokiniemi, M. Rajaniemi, W. Schäfer, H. Rossner, V. Poikalainen, J. Praks, I. Veermäe, J. Frorip, E. Kokin: Finland & Estonia |
Hand discomfort in production assembly workers – K. Jansen, M. Luik, M.
Reinvee, V. Viljasoo, J. Ereline, H. Gapeyeva, M. Pääsuke: Estonia |
|
|
15.20 – 17.00 |
Effect of the nitrification
inhibitors on fertilizer particles size distribution of the DASA®
26/13 and ENSIN® fertilizers – T. Šima, J. Krupička,
L. Nozdrovický: Slovak
Republic |
Research
in use of fuel conversion adapters in automobiles |
Potential for bioenergy development in Latvia: future trend analysis – A. Barisa, G. Cimdina, F. Romagnoli, D. Blumberga: Latvia |
Noise emission from grain dryers and potential noise
pollution – M.
Reinvee, M. Luik, P. Kliimak: Estonia |
|
|
|
The effect of fertiliser type on hybrid
aspen increment and seed yield of perennial grass cultivated in the
agroforestry system – A. Bardule, S. Rancane, I. Gutmane, P. Berzins, V. Stesele, D. Lazdina, A. Bardulis: Latvia |
Environmental Impact of Corn Grain Ethanol Production focussed on Energy Intensity and Global Warming Potential – S. Kraatz: Germany |
Environmental aspects of substitution bio-methane for natural gas in
brick industry – M.
Repele, M. Dudko, J. Rusanova, K. Valters, G. Bazbauers:
Latvia |
Exploring the effect of carbon dioxide demand controlled ventilation
system on air humidity – M.
Reinvee, J. Uiga, T. Tärgla, P. Pikkand A. Annuk: Estonia |
|
|
|
Influence of humidity on the quality of baled hops at grower – L. Vent, A. Rybka:
Czech Republic |
Impact of biofuels on characteristics of the engine tractor Zetor 8641 Forterra – M. Pexa, J. Mařík, K. Kubín, K. Veselá: Czech Republic |
Application of fluorescent in situ hybridization for monitoring methanogenic archaea in acid whey anaerobic digestion – K. Rugele, L. Mezule, B. Dalecka, S. Larsson, J. Vanags, J. Rubulis: Latvia |
Engineering drawing as a visual channel in
communication medium – H. Lille: Estonia |
|
|
|
Physical characteristics of picked hops during storage – L. Vent, A. Rybka: Czech Republic |
Oil palm shells use as alternative biofuel – M. Kaválek, B. Havrland, J. Pecen, T. Ivanova: Czech Republic |
Wood ash and waste water sludge recycling succes in fast growing deciduous tree – birch and alder plantations – D. Lazdiņa, K. Liepiņš, A. Bārdule, J. Liepiņš, A. Bārdulis: Latvia |
Combined air conditioning for heating rooms and improving of indoor climate – V. Viljasoo, J. Zadin, H. Jüris, T. Pomerants: Estonia |
|
|
|
Wood moisture of rural timber constructions - J. Papez, P. Kic: Czech
Republic |
The forming and combustion of
diesel fuel and bioethanol air fuel mixtures in a dual-fuel compression ignition engine – R. Ilves: Estonia |
Application of system dynamic model for the
composting of petroleum contaminated soil under various policies – J. Vilgerts, L. Timma, A.
Blumberga, D. Blumberga, Dz. Slišāne: Latvia |
|
|
|
|
The effect of fertiliser type on hybrid
aspen increment and seed yield of perennial grass cultivated in the
agroforestry system – A. Bardule, S. Rancane, I. Gutmane, P. Berzins, V. Stesele, D. Lazdina, A. Bardulis: Latvia |
A review of production and use of first generation biodiesel in
agriculture
– T.
Jokiniemi, J. Ahokas: Finland |
PMSG ased residential wind turbines:
possibilities and challenges
– L. Bisenieks, D.
Vinnikov, I. Galkin: Latvia ja Estonia |
|
|
|
|
Microwave treatment against the attack of wood boring in timber structures - H. Mõlder, J. Järvik, K. Pilt, M. Märss, R. Reiska: Estonia |
Characteristics of bioethanol fuel
obtained from lignocellulose biomass in internal combustion reciprocating
engines with spark- and compression-ignition
– A. Küüt: Estonia |
|
|
|
Thursday 9.05.13 |
Time |
Poster session (Institute of
Technology, second floor) |
|
|
17.00 – 18.30 |
Impact of the parameters of round and square haylage bales on the consumption of the sealing film for individual and in-line wrapping – S. Ivanovs, S. Gach, I. Skonieczny, A. Adamovičs: Latvia & Poland |
|
|
|
Bioethanol as a fuel for a two-stroke engine – R. Ilves: Estonia |
|
|
|
Composing and solving differential equations for small oscillations of
mathematical spring-coupled pendulums – A. Aan, M. Heinloo |
|
|
|
The mathematical model of segmented capacitance
sensor with grounded segments for determining of material distribution on the
conveyor – J. Lev, V. Prošek, M. Wohlmuthová and F. Kumhála: Czech Republic |
|
|
|
Evaluation of reed canary
grass shredding and compacting properties – A. Kronbergs, E. Kronbergs, E. Repsa: Latvia |
|
|
|
Effect of site-based precision
fertilization on yield and oil content of spring
oilseed rape seeds – J. Kuht, T. Tõrra, A.
Makke, J. Kilgi, E. Nugis: Estonia |
|
|
|
Some results of investigations
about modern soil tillage and results of express-diagnostic evaluation of
soil physical properties - L. Lüüs, E.Nugis, J.Kuht:
Estonia |
|
|
|
Development of model based supervision of Anaerobic
Digestion – A. Normak, E. Jõgi, J.
Suurpere: Estonia |
|
|
|
Influence of
harvesting time on biochemical composition and glucose yield from hemp – M. Tutt, T. Kikas, J. Olt:
Estonia |
|
|
|
Combined air conditioning for heating rooms and improving of indoor climate – V. Viljasoo, J. Zadin, H. Jüris, T. Pomerants: Estonia |
|
|
|
Interactions between size reduction and thermal processes during treatment of animal by-products – U. Sannik, L. Lepasalu, V. Poikalainen: Estonia |
|
|
|
Utilization of animal by-products and waste generated in Estonia – U. Sannik, L. Lepasalu, V. Poikalainen et al. |
|
|
|
|
|
|
19.00 – 22.00 |
Evening session at Tartu
University Restoran, 20 Ülikooli Str. |
|
|
|
Visits: |
|
Friday 10.05.13 |
10.00 – 11.30 |
Old Observatory, 25 Lossi Str., Tartu 51003 |
|
|
11.30 – 14.00 |
History Museum of
University of Tartu,
„Estonian Footprint on Space – Space Footprint on Estonia“ |